Product Description
The Vertex VS27-11A is a newer-generation lightweight brushless outrunner developed for indoor, backyard, and park-flying foam aircraft. Its 1800KV wind, approximately 20 g ready-to-install weight, higher-grade magnets, and carefully specified copper windings provide strong output, rapid acceleration, smooth operation, and dependable throttle response on 2S or 3S power.
VS27-11A Motor Overview
Lightweight 2S / 3S Outrunner
Aircraft Weight
Approx. 5–10 oz
Propeller Hub
5.5 mm Prop-Saver
Responsive Power for Lightweight Foam Aircraft
Designed for approximately 5 to 10 oz foam models, the VS27-11A delivers the quick acceleration and dependable vertical power needed for indoor, backyard, sport, and 3D flying.
View Vertex 16A ESC
Recommended Starting Setups
2S LiPo: 8 × 4 to 8 × 4.3 Slow Fly propeller
3S LiPo: Compatible 6 to 7-inch propeller
ESC: Appropriately rated brushless aircraft ESC
Best Used For: Lightweight indoor, backyard, park, sport, and 3D foam aircraft
Design and Construction
Motor Type: High-output brushless outrunner
Magnetic System: Higher-grade magnets for strong, consistent performance
Windings: Carefully specified copper windings for improved output and throttle response
Motor Connectors: Pre-soldered 2 mm bullet connectors
Included with the Motor
Motor
VS27-11A 1800KV Outrunner
Connectors
Pre-Soldered 2 mm Bullets
Propeller Retention
Prop-Saver Bands
Hub Hardware
Aluminum Prop-Hub Adapters
Mounting
Motor-Mounting Screws
Important Propeller Selection: Match the propeller to the battery voltage, aircraft weight, and intended flying style. Confirm that current remains within the ESC’s rated operating limits, and check motor, ESC, and battery temperatures when testing a new propeller or battery combination.
Compatible Products and Accessories