Product Description
While known for our airplane designs, Twisted Hobbys also creates some of the most powerful small motors. Our Crack Series Pro motors are a prime example of power, balance, and quality. Built to Twisted Hobbys' specs, these motors deliver unmatched performance, reliability, and longevity.
The Crack Series Pro 2213-1200KV 60g brushless motor is perfect for 12-24oz foamie 34-48" TH/RCF EPP models, pairing seamlessly with our 22A ESC for easy plug-and-play. Recommended Setup: 3s 850mah Lipo XT30 w/ 10-11" Prop
Specs:
- Stator Diameter: 22.0 mm (0.866 in)
- Stator Thickness: 13 mm (0.512 in)
- Number of Stator Slots: 12
- Number of Magnet Poles: 14
- Motor Wind: 26 Turn Delta
- Motor Kv Value: 1100 RPM per Volt
- No Load Current (Io:) 0.45 Amps @ 8 Volts
- Motor Resistance (Rm) per Phase: 0.201 Ohms
- Motor Resistance (Rm) Phase to Phase: 0.134 Ohms
- Maximum Continuous Current: 16 Amps
- Max Continuous Power (3-cell Li-Po): 200 Watts
- Motor Weight: 60 grams includes assemblied hardware/ 51g motor itself
- Outside Diameter: 27.7 mm (1.091 in.)
- Shaft Diameter: 3.17 mm (0.125 in.)
- Motor Body Length: 28.0 mm (1.102 in.)
- Overall Shaft Length : 42.0 mm (1.654 in.)
- Motor Timing: 5-10 degrees
- PWM Frequency: 8kHz
- Heavy Duty 3mm Thick Cross Style Alum Motor Mount
- Four M3x6mm Motor Mount Screws
- Bolt-On style threaded prop adapter with 4 screws (new upgrade)
- Retaining Collar with Set Screw
- Three pieces of heat-shrink tubing
- Pre-Soldered 3.5mm Bullet Connectors
