Product Description
CSP 2203 1800KV 18 g Brushless Outrunner Motor
The Crack Series Pro 2203 1800KV is a lightweight and proven outrunner designed for indoor, backyard, and park-flying foam aircraft where low installed weight and dependable performance are priorities.
Its shallow-profile design, integrated prop-saver hub, hollow shaft, and balanced rotating assembly provide quick acceleration, smooth throttle response, and efficient cooling.
Features and Specifications
- Motor Size: 2203 brushless outrunner
- KV Rating: 1800KV
- Weight: Approximately 18 g with pre-soldered connectors
- Recommended Aircraft: Lightweight foam models weighing approximately 5 to 10 oz
- Battery Compatibility: 2S or 3S LiPo
- Current Rating: 8A continuous / 16A burst
- Tested Power: Approximately 58W on 2S and 78W on 3S, depending on propeller and battery
- Propeller Hub: Integrated 5.5 mm prop-saver hub
- Motor Connectors: Pre-soldered 2 mm bullet connectors
Recommended Setups
2S LiPo: 8 x 4 to 8 x 4.3 Slow Fly propeller
3S LiPo: Compatible 6 to 7-inch propeller, including approximately 7 x 3.5
Do not use the recommended 8-inch 2S propeller on 3S. Always verify current draw and check motor, ESC, and battery temperatures when testing a new setup.
Included
- CSP 2203 1800KV brushless motor
- Pre-soldered 2 mm bullet connectors
- Prop-saver bands
- Aluminum prop-hub adapters
- Motor-mounting screws
