Product Description
HM 35" EPP REXTRA 260
The REXTRA 260 is a large indoor aerobatic model developed with pilot Radek Raja for the 2025 Indoor World Championships. Its lightweight EPP construction, extensive carbon-fiber reinforcement, and oversized control surfaces provide the rigidity and control authority required for precision freestyle and advanced aerobatics.
Low wing loading allows smooth, controlled slow flight, while the large control surfaces deliver rapid response for advanced 3D and reversible 4D flying. Reduced control rates can provide a more manageable response for intermediate pilots.
Features and Specifications
- Wingspan: 900 mm / 35.5 inches
- Length: 950 mm / 37 inches
- Estimated Flying Weight: 180 to 220 g / 6.3 to 7.8 oz
- Construction: Lightweight printed EPP with extensive carbon-fiber reinforcement
- Control Surfaces: Oversized surfaces for strong maneuverability and control authority
- Recommended Battery: 2S or 3S 450 to 600 mAh LiPo
- Power-System Compatibility: Standard 3D or reversible 4D
- Flight Style: Indoor precision, freestyle, advanced aerobatics, 3D, and 4D
- Flying Environment: Indoor facilities or calm outdoor conditions
- Pilot Level: Intermediate to Advanced
Required to Complete
This is an airframe kit requiring assembly. The power system, radio equipment, battery, charger, and adhesives are sold separately. No printed manual is included; a downloadable PDF manual is available under Build Resources below.
Recommended Matched Power System
REXTRA 260 3D/4D Competition Power System
Choose between four lightweight CSP-D6M servos or four premium Vertex VX-SV10D metal-case servos.
Matched Power-System Components
- Vertex VS28-05C 1950KV 3D/4D motor
- Vertex 17A switchable 3D/4D reversible ESC
- Four CSP-D6M digital metal-gear servos or four Vertex VX-SV10D metal-case servos
- APC 8 x 4.1 slow-fly propeller for standard 3D flight
- APC 8 x 3.7 SFR reversible propeller for 4D flight
The Vertex ESC can be switched between conventional 3D and reversible 4D operation. Always install the correct propeller and matching motor hub for the selected operating mode.
Additional Required Items
- Compatible 4 to 6-channel transmitter and lightweight receiver
- 2S or 3S 450 to 600 mAh LiPo battery
- LiPo-compatible balance charger
- Foam-Tac, thin CA, and medium CA adhesive
Build Resources and Compatible Parts
- Download the REXTRA 260 PDF Build Manual
- Watch the REXTRA 260 Build Video
- Visit the REXTRA 260 RC Groups Discussion
- Shop Compatible 35-Inch Replacement Parts
- Shop Compatible 4D Reversible Propellers
We recommend Foam-Tac for the main EPP assembly and thin or medium CA where specified for carbon-fiber reinforcement and hardware connections.
Product Videos
Videos Hide Videos Show Videos
Custom Field
Product Reviews
2 Reviews Hide Reviews Show Reviews
-
Perfection
This feels like peak performance from a foamie. I don't really see how it could be any better. With the Vertex power combo, there isn't another model to really compare it to. It is my go-to for extreme freestyle. At 35" it feels bigger than anything else I've flown in this category. The stiffness of the whole airframe makes inputs quick and precise, but it also slows down well for smooth, low flying. The build is not the best for a beginner, but it was straightforward and although I wish the pushrods had some adjustability, I get that the goal is performance. Being so thin and lightweight, it needs very little wind or a good indoor space.
-
Oliver Willis
Head over heels for how this one flies! So precise and floaty but has gobs of authority and turns on a dime! By far one of my favorite super lite airframes I’ve had the privilege of flying!
