ELECTRONICS

CSP 2203 1800KV 18g Brushless Outrunner Motor

CSP 2203 1800KV 18 g Brushless Outrunner Motor The Crack Series Pro 2203 1800KV is a lightweight and proven outrunner designed for indoor, backyard, and park-flying foam aircraft where low installed weight and dependable performance are priorities. Its...

CSP 2202 2300KV 15g Brushless Outrunner Motor

Twisted Hobbys isn’t just about airplanes—we’re also known for high-performance small motors! The Crack Series Pro is our latest breakthrough, surpassing our most popular 14g out-runner with more power, balance, and acceleration...

CSP 2202L 1650KV 14g Lightweight Brushless Outrunner Motor

The Crack Series PRO 14g 2202 - 1650kv is built specifically for lightweight foam aircraft that demand smooth power without excess thrust. Designed for low weight and efficient output, this motor is ideal for indoor models and light 3D flyers where...

Vertex VS28 Hardware Bag

Vertex replacement outrunner hardware bag.  Used for VS28-05C & 05B motors: Includes: Prop Wrench Tool: Prop Hub for prop savers assemble: 7mm and 5.5mm hub diameters Bolt Down Style Prop hub 5mm Shaft: Used with APC new 4D Props with 5mm...

CSP/VS Small Flange Base Motors - Hardware Bag

Hardware replacement kit that comes with all Crack Series Pro & Vertex VS small flange based out-runner motors.  Included 4pc's 5.5 to 7mm prop hub adapters, 4 mounting screws and 4 o-rings.

Prop-Saver Bands "Standard Duty" (5)

Not your ordinary over-the-counter O-ring, great replacement 3/32" thick standard bands ideal for running stock setup systems running 2s! Great replacements for our 14-30g out-runner prop savers o-rings. These o-rings were made to...

Prop-Saver Bands HD "Heavy Duty" (5)

Not your ordinary over-the-counter O-ring, heavy duty 1/8" thick ideal for running 3s setups! Great replacements for our 24-30g out-runner prop savers o-rings. These o-rings were made to handle all the stresses you can throw it them...

CSP 2212 & 2213 CSP Motor Prop Adapter & Flange mount

Used for All Crack Series Prop and TMW 2212 & 2213 series motors.   Prop Adapter bolt on style mounted opposite side of the shaft (reverse mounting) also now includes mounting flange mount screws.  This is the stock part that comes with...

CSP 2217 70g motor hardware kit

Crack Series Prop and TMW 2217 replacement 5mm front prop hub assembly with screw kit.  Includes motor mount, prop hub adapter, mounting screws, prop hub and washer. Used for Crack Series Pro and TMW 70-78g motors.

CSP 2814 100g hardware kit

TMW & Crack Series Pro 2814 complete replacement hardware bag.  Included 6mm front prop hub adapter, mounting screws (front and back), flange mount, prop hub locking nut and washer.

Motor 5mm shaft w/ 3.17mm Prop Adapter/Collet "Small"

These are the direct replacement Collect/Prop Adapter 3.17mm shaft out-runner motors.   Prop thread diameter = 5mm +/- .025

4mm Motor Shaft Prop Adapter/Collet "Large" MIXED COLORED

These are the direct replacement Collect/Prop Adapter 4mm shaft out runner motors Hub (motor shaft) diameter = 4mm Prop thread diameter = 6mm +/- .025 Mixed colored:

Prop-Saver Bands "Installation Tool"

Prop-Saver Band Installation Tool This compact hand tool makes it easier to install and remove prop-saver bands without struggling with screwdrivers or other improvised tools. It provides controlled leverage for stretching both standard-duty and...

Ultra Halo XX0 LED Light Stick Kit – Small

Ultra Halo XX0 LED Light Stick Kit: Small and Lightweight The Ultra Halo XX0 is our smallest and lightest LED lighting kit, developed for 20 to 35-inch RC aircraft where brightness and visibility are needed without adding unnecessary weight. The...

LED Ultra Halo's Light Stick - XX1 - Large

Ultra Halo XX1 LED Light Stick Kit: Large The Ultra Halo XX1 is a lightweight, high-output LED lighting kit designed for medium to larger RC aircraft with approximately 32 to 48-inch wingspans. Its extended light sticks provide excellent visibility...