Product Description
Meet the Ultimate 3D 1000! The Hacker Models Ultimate 3D 1000 is a full-fuselage aerobatic biplane designed for pilots who want the classic Ultimate look combined with modern 3D performance. Its lightweight EPP construction and carbon-reinforced airframe create a model that is both highly durable and exceptionally capable in the air.
The semi-scale design offers smooth precision aerobatics while still delivering the control authority needed for hovering, torque rolls, waterfalls, harriers, and aggressive freestyle maneuvers. Whether you're practicing IMAC-style precision or pushing into advanced 3D, the Ultimate feels locked in and predictable throughout the flight envelope.
Built from nearly unbreakable EPP foam, the Ultimate 3D 1000 assembles quickly and is easy to repair, making it an excellent everyday aerobatic model for experienced pilots.
Features and Specifications
- Wingspan: 39.3" (1000mm)
- Length: 41.3" (1050mm)
- Estimated Flying Weight: Approximately 27 oz (770g+), depending on equipment selection
- Construction: Lightweight printed EPP foam with carbon-fiber reinforced fuselage and wings
- Wing Design: Fully airfoiled biplane wings for smooth precision and 3D performance
- Controls: Aileron, elevator, rudder, and throttle
- Battery: 3S or 4S 1500–2200mAh LiPo
- Flight Style: Sport aerobatics, precision aerobatics, freestyle, hovering, harriers, torque rolls, and advanced 3D
- Pilot Level: Intermediate to Advanced
Required to Complete
This is an airframe kit. The recommended power system, radio equipment, battery, charger, and adhesives are sold separately. A downloadable build manual is available under Resources below.
Recommended Matched Power System
PC100 Power System Includes
- CSP 2814 1050KV brushless motor
- CSP 45A ESC
- Four CSP-D18M digital metal-gear servos
- APC 12 × 4.5MR propeller
Additional Required Items
- 4–6 channel transmitter and compatible receiver
- 3S or 4S 1500–2200mAh LiPo battery
- LiPo-compatible balance charger
- Foam-Tac, thin CA, and medium CA glue
Resources
We recommend Foam-Tac for the primary EPP assembly and thin or medium CA glue where specified for carbon-fiber reinforcement and hardware installation.
