Product Description
Hacker Models Shake is their new In-door Super Lite slow aerobatic 3d model. Ideal for precision indoor aerobatic flying F3P category. Model is produced by modern technology on CNC machines from EPP “almost unbreakable” sheets only 4mm thickness. Extremely easy to fly being very low wing loading which is ideal for first time and even experienced indoor pilots. High fuselage and ”T” canalizer gives great flight characteristics for all maneuvers to the model.
Specs: Wingspan/Length = 33"/36". AUW = 125-135g
Power system components:
CSP-2203-1800KV Motor
CSP-15A ESC
CSP-D10M Servo
CSP-D6M Servos (2)
8 x4.3 GWS SF prop
Other Requirements:
Receiver 4 - 6 ch: Link
2s 450mah Lipo: Link
Adhesive Glue : Link
Resources:
Hacker Shake PDF Manual: Link
Rcgroups Thread
Rcgroups Milled Build Thread
Product Videos
Videos Hide Videos Show Videos
Custom Field
Product Reviews
1 Review Hide Reviews Show Reviews
-
Hacker Shake What a cool Plane !
I have been flying the Clik 21 for a while now and it is a great plane - lots of fun - I bought the Shake a while ago so to fly something different I built it. I am glad I did - Fantastic fun flying airplane. The only fault I can find is the instructions are weak with no written words - lots of pictures but needs written directions at some points. If you have ever built a carbon fiber foamy you can figure it out from the pictures. I used SunnySky 2303 on 2S lipo - 10 amp ESC with APC 9X3.71 propeller. I like this setup. The finished plane weighted 143 grams (without the battery) - a little heavier than the Clik 21. The Shake does anything you ask it to do - I highly recommend this plane to any indoor flyer.
