Product Description
The Hacker Model New Micro Magic ARTR is a compact, high-performance RC sailboat developed for the internationally recognized Micro Magic racing class. Its vacuum-formed ABS hull, finished A-size Mylar racing sails, carbon-fiber mast and boom, and installed sail and rudder servos provide a strong head start toward a precise recreational or competition-ready sailboat.
Overall Height
980 mm / 38.6 in
Sailing Weight
820 g+ / 28.9 oz+
Sail Area
1,450 cm² / 225 sq in
Almost Ready-to-Run Sailboat
This ARTR version includes a completed hull with the rudder and sail-control servos installed. The keel, rudder, mast, rigging, radio equipment, receiver power system, and wooden stand require installation or assembly before sailing.
Preassembled Hull with Installed Servos
The MF A-1109 metal-gear rudder servo and MF A-4806HB sail-control servo are installed in the completed hull. This saves substantial building time while allowing the modeler to complete the keel, rudder, mast, rigging, radio, and final sailing setup.
View PDF Manual
Included with the Micro Magic ARTR
Hull: Preassembled vacuum-formed ABS hull, deck, and cabin
Keel and Rudder: Fiberglass-reinforced keel fin, ballast, and rudder assembly
Sails: Finished A-size Mylar 3D racing sails
Mast and Boom: Lightweight carbon-fiber tubes
Rudder Servo: MF A-1109 metal-gear 10 g servo, installed
Sail Servo: MF A-4806HB 48.5 g servo, installed
Stand: Laser-cut wooden display and transport stand
Finishing Items: Hardware package, decal set, and instruction manual
Additional Items Required
Radio: Minimum 2-channel transmitter
Receiver Power: Suitable battery pack or battery holder, power switch, and connectors
Radio Batteries: Batteries required by the selected transmitter and receiver setup
Final Assembly: Install the keel, rudder, mast, rigging, radio equipment, and wooden stand
Transmitter, receiver, receiver power system, radio batteries, and adhesives are not included.
ARTR Assembly Note: This version saves considerable building time with the hull completed and both servos installed, but it is not fully ready to sail. Carefully follow the manual for the remaining mechanical assembly, rigging, radio installation, and control setup.
Important Before Sailing: Turn on the transmitter before the boat electronics. When finished, turn off the boat first and the transmitter second. Confirm rudder direction, sail-servo travel, keel and rudder security, rigging, battery security, and canopy sealing before launch.
Sailing Resources and Compatible Parts