Outrunner 2212 1000KV 55g "Crack Series Pro" Motor
- SKU:
- 55g 2212-1000KV CSP
- MPN:
- CSP 55g 2212-1000KV
- Bulk Pricing:
- Buy in bulk and save
On Sale
Description
While known for our airplane designs, Twisted Hobbys also creates some of the most powerful small motors. Our Crack Series Pro motors are a prime example of power, balance, and quality. Built to Twisted Hobbys' specs, these motors deliver unmatched performance, reliability, and longevity.
The Crack Series Pro 2212-1000KV 55g brushless motor is perfect for 12-20oz foamie 34-45" TH/RCF EPP models, pairing seamlessly with our 20A ESC for easy plug-and-play. Recommended Setup: 3s 450-850+mah (JST connectors required) w/ 10" Prop
Specs:
- Stator Diameter: 22.0 mm (0.866 in)
- Stator Thickness: 13 mm (0.512 in)
- Number of Stator Slots: 12
- Number of Magnet Poles: 14
- Motor Wind: 26 Turn Delta
- Motor Kv Value: 970 RPM per Volt
- No Load Current (Io:) 0.45 Amps @ 8 Volts
- Motor Resistance (Rm) per Phase: 0.201 Ohms
- Motor Resistance (Rm) Phase to Phase: 0.134 Ohms
- Maximum Continuous Current: 14 Amps
- Max Continuous Power (3-cell Li-Po): 150 Watts
- Motor Weight: 55 gramsi ncludes assemblied hardware/ 47g just motor
- Outside Diameter: 27.7 mm (1.091 in.)
- Shaft Diameter: 3.17 mm (0.125 in.)
- Motor Body Length: 28.0 mm (1.102 in.)
- Overall Shaft Length : 42.0 mm (1.654 in.)
- Motor Timing: 5-10 degrees
- PWM Frequency: 8kHz
- Heavy Duty 3mm Thick Cross Style Alum Motor Mount
- Four M3x6mm Motor Mount Screws
- Bolt-On style threaded prop adapter with 4 screws (new upgrade)
- Retaining Collar with Set Screw
- Three pieces of heat-shrink tubing
- Pre-Soldered 2mm Bullet Connectors (works directly with our 20A ESC)
2 Reviews
-
2212 crack pro
Was hoping for more punch out of hover
-
2812
Great power and very light. Great for 14 to 16 oz. 3D foamies.