Beacon Foam Tac Glue - 1 oz. Rc Foam 3D Plane airplane Model kit Trainer

Overview
Reviews

Product Description

Expect the freshest Beacon Foam Tac glue(s) from Twisted Hobbys due to high turn over. New redesigned tube and cap! Great alternative to Welder Adhesive glue and CA glues when building your EPP models. FOAM-TAC’S improved formula now contains UV blockers so that it can be used in the field in direct sunlight without any yellowing or degrading. We’ve also added a special adhesion promoter to make the glue even stronger and more durable than before. Hands down, Foam-Tac is the best choice for building and repairing all parts of foam planes including motor mounts, control horns and rods, attaching servos, and tacking down wires.
Key features why Twisted Hobbys uses Beacon Foam tac glues on all EPP models:

Foam-Tac never yellows or becomes brittle.
Very low odor, no fumes.
Dries fast and crystal clear.
Never foams or expands or needs a kicker.
Remains flexible. Glue joints flex with the foam, preventing separation from hard impacts.
Long shelf life –up to 2 years if properly stored away from heat and with white cap replaced. If white cap is lost, remove applicator cap and put a small piece of aluminum foil over the opening and then replace the applicator. Store at room temperature.
No need to store in the fridge or freezer.
Works on ALL types of foam including Depron, EPP, EPO, Styrofoam, insulating foam, and even florist’s foam, as well as with balsa wood and carbon fiber.
Great for waterproofing.

Includes: (1) 1 oz tube
Note: How much glue per model? We recommend at least (1) 1 oz for all smaller models, and (2) 1 oz tubes for all 35" and larger models.

Product Videos

Custom Field

Product Reviews

Write a Review

40 Reviews Hide Reviews Show Reviews

5
Best EPP glue...PERIOD!!

Posted by Decal Dennis on Aug 24th 2016

I have been using Welder's glue on my foamie builds for many years, somewhat recently a friend told me about Beacon Foam-Tac, so I decided to give it a try on my last TH build....I don't think I will ever use welders glue ever again! The beacon foam-Tac glue has very little if any odor, provides a good tack set in no time, so you can continue to build and has a good firm set in about 24 hours and unlike Welders glue, Beacon Foam-Tac won't yellow over time.
5
No more smell!

Posted by Unknown on Aug 23rd 2016

Best part of this product is the no more small compared to Welders. Its more expensive but it seems to work as good or better. Also you get more in a tube. Drys quick and clean will be using on all my epp models for now on.
4
Works well on most surfaces

Posted by Mark Beltran on Aug 20th 2016

It does not have the strong smell that Goop or Welders or E6000 has. It has a similar drying time than the competition. It dries clear and glossy with a hard rubber texture. I give it 4 stars instead of 5, because it's very expensive.
5
Best glue on the market for EPP

Posted by Jay Black on Aug 15th 2016

I love this glue it has very little odor. Some are very strong smelling for me.

BEACON FOAM TAC - 1 oz. TUBE - EPP Models

Bulk discount rates