Product Description

Expect the freshest Beacon Foam Tac glue(s) from Twisted Hobbys due to high turn over. New redesigned tube and cap! Great alternative to Welder Adhesive glue and CA glues when building your EPP models. FOAM-TAC’S improved formula now contains UV blockers so that it can be used in the field in direct sunlight without any yellowing or degrading. We’ve also added a special adhesion promoter to make the glue even stronger and more durable than before. Hands down, Foam-Tac is the best choice for building and repairing all parts of foam planes including motor mounts, control horns and rods, attaching servos, and tacking down wires.
Key features why Twisted Hobbys uses Beacon Foam tac glues on all EPP models:

Foam-Tac never yellows or becomes brittle.
Very low odor, no fumes.
Dries fast and crystal clear.
Never foams or expands or needs a kicker.
Remains flexible. Glue joints flex with the foam, preventing separation from hard impacts.
Long shelf life –up to 2 years if properly stored away from heat and with white cap replaced. If white cap is lost, remove applicator cap and put a small piece of aluminum foil over the opening and then replace the applicator. Store at room temperature.
No need to store in the fridge or freezer.
Works on ALL types of foam including Depron, EPP, EPO, Styrofoam, insulating foam, and even florist’s foam, as well as with balsa wood and carbon fiber.
Great for waterproofing.

Includes: (1) 1 oz tube
Note: How much glue per model? We recommend at least (1) 1 oz for all smaller models, and (2) 1 oz tubes for all 35" and larger models.

Product Videos

Custom Field

Product Reviews

Write a Review

40 Reviews Hide Reviews Show Reviews

5
Love the clear set

Posted by Roy Graham on Feb 14th 2020

Holds
5
FOAM-TAC

Posted by ELLSWORTH on Jan 30th 2020

EXCELLENT FOR FOAM AIRPLANES
5
Great glue for just about any material

Posted by TorqueRoller on Nov 21st 2019

When you want a quick drying glue that can be used as either a contact adhesive or put together wet in faying surface joints, Glue Beacon Foam-Tac works great. The glue joint retains some flexibility and works on so many combinations of materials. Very good stuff!
5
foam-tac foam glue

Posted by Lonnie on Aug 22nd 2019

best glue for foam I have tried. Highly recommended.
5
Foam Tac

Posted by David Lalone on Aug 12th 2019

Works great fast or slow
5
Great Glue

Posted by Danny on Jul 27th 2019

I have used all types of glues and this stuff is great! If put on to heavy can slightly melt depron but this also makes a super strong bond. Will only use this for foamies.
5
Beacon's Foam Tac

Posted by Bobby on Jul 25th 2019

This is the Best Glue for Building with EPP Foam and for making Hinges! I've used a lot of other Glues on EPP, Foam Tac is the Best for EPP! Been in the Hobby for 56 years!
5
Foam-Tac Adhesive

Posted by John on Feb 9th 2019

I've heard of this product being very good with all sorts of foam and I decided to give it a try. I used it on EPP foam and I'm pleased with the results. I expect to have future success with the adhesive.
5
Works great for foam planes

Posted by Ron Williams on Dec 12th 2018

Better than Welder and easier to use

BEACON FOAM TAC - 1 oz. TUBE - EPP Models

Bulk discount rates